Contents of PC CHRIS
PC CHRIS provides the following information on over 1200 hazardous substances:
1. Response to Discharge
2. Label
3. Chemical Designations
- 3.1 CG Compatibility Class
- 3.2 Formula
- 3.3 IMO/UN Designation
- 3.4 DOT ID No.
- 3.5 CAS Registry No.
4. Observable Characteristics
- 4.1 Physical State (as Shipped)
- 4.2 Color
- 4.3 Odor
5. Health Hazards
- 5.1 Personal Protective Equipment
- 5.2 Symptoms Following Exposure
- 5.3 Treatment of Exposure
- 5.4 Threshold Limit Value
- 5.5 Short Term Inhalation Limits
- 5.6 Toxicity by Ingestion
- 5.7 Late Toxicity
- 5.8 Vapor (Gas) Irritant Characteristics
- 5.9 Liquid or Solid Irritant Characteristics
- 5.10 Odor Threshold
- 5.11 IDLH Value
6. Fire Hazards
- 6.1 Flash Point
- 6.2 Flammable Limits in Air
- 6.3 Fire Extinguishing Agents
- 6.4 Fire Extinguishing Agents Not to be Used
- 6.5 Special Hazards of Combustion
- 6.6 Behavior in Fire
- 6.7 Ignition Temperature
- 6.8 Electrical Hazard
- 6.9 Burning Rate
- 6.10 Adiabatic Flame Temperature
7. Chemical Reactivity
- 7.1 Reactivity with Water
- 7.2 Reactivity with Common Materials
- 7.3 Stability During Transport
- 7.4 Neutralizing Agents for Acids and Caustics
- 7.5 Polymerization
8. Water Pollution
- 8.1 Aquatic Toxicity
- 8.2 Waterfowl Toxicity
- 8.3 Biological Oxygen Demand (BOD)
- 8.4 Food Chain Concentration Potential
9. Shipping Information
- 9.1 Grades of Purity
- 9.2 Storage Temperature
- 9.3 Inert Atmosphere
- 9.4 Venting
10. Hazard Assessment Code
11. Hazard Classifications
- 11.1 Code of Federal Regulations
- 11.2 NAS Hazard Rating for Bulk Water Transportation
- 11.3 NFPA Hazard Classification
12. Physical and Chemical Properties
- 12.1 Physical State at 15º C and 1 Atm
- 12.2 Molecular Weight
- 12.3 Boiling Point at 1 Atm
- 12.4 Freezing Point
- 12.5 Critical Temperature
- 12.6 Critical Pressure
- 12.7 Specific Gravity
- 12.8 Liquid Surface Tension
- 12.9 Liquid Water Interfacial Tension
- 12.10 Vapor (Gas) Specific Gravity
- 12.11 Ratio of Specific Heats of Vapor (Gas)
- 12.12 Latent Heat of Vaporization
- 12.13 Heat of Combustion
- 12.14 Heat of Decomposition
- 12.15 Heat of Solution
- 12.16 Heat of Polymerization
- 12.17 Saturated Liquid density
- 12.18 Liquid Heat Capacity
- 12.19 Liquid Thermal Conductivity
- 12.20 Liquid Viscosity
- 12.21 Solubility in Water
- 12.22 Saturated Vapor Pressure
- 12.23 Saturated Vapor Density
- 12.24 Ideal Gas Heat Capacity
- 12.25 Heat of Fusion
- 12.26 Limiting Value
- 12.27 Reid Vapor Pressure
PC CHRIS also provides an initial response guide "page" for each individual material which addresses: Common Synonyms/Material Characteristics, Precautionary Actions, Fire Hazards and Response, Exposure
Hazards, First Aid, and Water Pollution
|